bing tracking image
  1. Accessories and Parts
  2. Stromberg Carlson
  3. Camper Jacks
  4. Trailer Jack
  5. Legs
  6. Driver Leg
Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2"

Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2"

Item # LG-177202
Retail:$275.99
Our Price: $234.62
You Save: $41.37
Accessories and Parts
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Replaces the lead leg in your Stromberg Carlson landing gear set (LG-2 or LG-4). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included). 1-800-940-8924 to order Stromberg Carlson accessories and parts part number LG-177202 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Great prices and Fastest Shipping for Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2". Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (41)
  • Q & A (0)
  • Photos

Stromberg Carlson Accessories and Parts - LG-177202

  • Camper Jacks
  • Trailer Jack
  • Legs
  • Driver Leg
  • Stromberg Carlson

Replaces the lead leg in your Stromberg Carlson landing gear set (LG-2 or LG-4). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).


Features:

  • Replaces the lead jack for your tandem landing gear
    • Designed for use with Stromberg Carlson models LG-2 and LG-4
    • Can be used with most landing gear sets, including Venture and Lippert models
  • Provides a mounting point for the hand crank or motor (sold separately)
  • Connects to the follow jack in your landing gear set with a connecting rod, or cross shaft (not included)
  • Constructed of heavy-duty steel
  • Includes drop leg and cage pin
  • Made in the USA


Specs:

  • Total lift: 34-7/8"
    • Travel: 19-7/8"
    • Drop leg: 15"
  • Leg length: 33-1/2"
  • Weld stops:
    • Outside to outside: 21-1/2"
    • Inside to inside: 19-1/2"
  • Weight capacity: 4,000 lbs for manual crank, 2500 lbs for single motor


LG-177202 Stromberg Carlson Replacement Lead Leg for Venture Landing Gear - 33-1/2"




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2" - LG-177202

Average Customer Rating:  4.8 out of 5 stars   (41 Customer Reviews)

Replaces the lead leg in your Stromberg Carlson landing gear set (LG-2 or LG-4). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).

by:

Bought this to replace a bent leg on my fifth wheel. Relatively easy to remove and replace this part. Just make sure you buy the correct part (LH and RH sides of your landing gear are different part numbers). The eTrailer folks are pretty good at confirming fit with you. You may have to measure the length of the landing gear housing to ensure you have a 1:1 match. You will need to re-use your existing motor. I will likely buy the matching piece for the RH landing gear soon.



by:

I recently ordered this landing gear through E trailer and the product was received quickly but in shipping it was damaged so I contacted them and the damaged part was quickly replaced, no hassles just good service



by:

this landing gear work great for my tra iler



by:

etrailer allowed the return of the first leg sent. It did not fit. They worked to find one that would. I had to have another stop tab welded on the Stromberg Carlson leg as Forest River’s design of the receiving brackets on our 2012 Brookstone Ruby required it. Thanks etrailer. Installing it tomorrow.

Bill

12/3/2022

Working fine. Thanks.



by:

This rating is for the purchase and delivery as it will be about a week before the part is installed.
The order was delivered in only 3 days.....That's [retailer] freaky fast!!!
Great service by etrailer, once again.

Rf-4c J.

3/31/2018

Installation was fairly straight forward. One problem was the lugs on the side of the jack were too close together so the leg would not go in place. I took it to a friend who had an angle grinder. After dressing the top lug off a bit on the bottom side, about 1/8th inch, the leg fit fine.Due to medical reasons that jack has only been used twice as the trailer remains in storage.



by:

Landing Gear Leg and Motor Gearbox replacement. Real Deal Parts.
1 for 1 removal and replacement for each component- Perfect fit.
This business is run like each of the employees takes pride in making the business profitable. The website is a tremendous resource for anyone needing guidance in selecting replacements for a few 10+ yr old broken/ worn out parts (as I was).
Fast shipping too.



by:

Bough two lead legs for my 5th. One broke a worm gear and other one was going. Passenger side one went right in. The drivers side one i had to file down the edge of mount some to get it in. The two mounts were just touching and would not pass each other. New landing gear seems strong and should outlast ny ownership for years to come. Whats really nice the top comes off and you can grease the worm gear on these, unlike my stock ones there was no way to really grease them. You can also replace the worm gear on these as well ,unlike the stock ones where gear is stamped into the leg. These are removable if needed.



by:

While on a camping trip one of the front jacks of our toy hauler broke. When we got home ordered a replacement from e trailer. Was received in 2 days and installation took about 30 minutes. Pleased with the experience and product so far. Would definitely order from them again.



by:

I couldn't have received better service ! Dana was amazing and I always tell my friends about the great service she provided for me. I received emails start to finish from her the only thing Dana could have done more would have been install the landing gear for me ! as far as the product it is very good quality .



by:

I have a 36ft toy hauler as I was about to park it after a weekend at the dunes I was lowering the Landing gear and nothing motor turned no lift :( called etrailer and they were great they knew everything I needed and had it in stock , here's the best part shipping was very fast!!! , I installed the new replacement legs today and fit like a glove wow I'm back in business !! !!



by:

Product and service was great.

Need
to be care full when ordering as we missed this. Each trailer takes two different legs. Our original legs had no markings on them and it was all measurements. This part worked out great. We just did not catch that you need a right and left landing leg.



by:

Perfect replacement lead leg for our 2003 Outback travel trailer. Extremely fast shipping which was so nice when we needed the part as quick as possible. Very impressed!



by:

My landing gear arrived a full two days early, and they turned out to be the exact parts needed. I didn't take any pictures because in just a short time, (about an hour) I had the entire project completed. etrailer.com does a really good job!



by:

These legs worked great,look and feel to be of good quality and best of all made in the USA.



by:

I ordered the second downleg for my fifth wheel. Delivery was quick, both legs fit perfect and work perfect. Etrailer also matched the price from a different source.

Everything was a great experience



by:

Great service mail right out. The lead leg fit perfectly. Very happy with your products and service



by:

Part was delivered at noon and it fit perfectly. From time of order less then Two days since we could not disconnect the trailer.



by:

Product received as expected. Satisfied with etrailer again.



by:

Excellent price, fit perfectly and was easy to install.
Customer service person was knowledgeable in finding the correct part#. Shipping was on time



by:

Great price
Exact fit
Easy install

Replaced a leg with broken gears



by:

product was easily installed and a good match.



by:

Customer service was great. Arrived only days after ordering. Will do business here again



by:

Just received it 1 day earlier than promised. Haven't had a chance to replace it so will update later.



by:

Exactly what was advertised at a good price. Prompt delivery.



by:

Product great serviceok


25
41
Show More Reviews

See what our Experts say about this Stromberg Carlson Accessories and Parts

  • Can a Venture Landing Gear Leg be Greased
    I do not recommend adding grease zerk fittings to a jack leg that did not originally come with them. drilling holes into the jack could compromise its structural integrity. You would need to open up the jack legs to add grease. Before adding any grease you will need to make sure that you completely remove any of the old grease. This is because not all greases are compatible with each other, see linked help article. To open the top you will need to pry the cap off with a screwdriver. Inside...
    view full answer...
    Image 1 for
  • Bracket Location Measurements Of Replacement Lead Leg for Stromberg Carlson Venture Landing Gear
    I went to the warehouse and took some measurements of the Replacement Lead Leg, part # LG-177202 for you. I have attached a photo of the leg with the measurements noted. From the top of the leg to the top of the upper bracket is 7 inches. To the top of the lower bracket that distance is 27-1/2 inches. The brackets are 1 inch tall so the distance to the bottom of the upper bracket is 8 inches and the distance to the bottom of the lower bracket is 28-1/2 inches.
    view full answer...
    Image 1 for
  • Recommendation to Upgrade to Dual Motor Landing Gear System on Trailer
    In order to upgrade your existing landing gear system to a dual motor setup, I recommend completely replacing the follower leg with a lead leg # LG-177202. I have attached the dimensions for this lead leg so you can compare them to your existing unit to make sure it will work well as a replacement. It's technically possible to upgrade the follower leg by replacing all of its inner components, but this is extremely involved and it is much safer to simply replace the leg itself. On a dual...
    view full answer...
    Image 1 for
  • Replacement Landing Gear for 2011 Heartland Big Country 5th Wheel Trailer
    If your landing gear is electric then it could just be a switch or the battery could be bad. Having the battery tested will determine if it is the problem. You can determine if the switch is the problem by applying power directly to the motor; if it works fine then it is likely a problem with the switch. A battery or switch replacement is a lot easier and less expensive than a whole new landing gear system! But if it turns out that it is neither a switch nor the battery then I agree that...
    view full answer...
  • Can the Stromberg Carlson Electric Landing Gear Set LG-4 Be Bought Without the Motor
    In order to piece together a kit similar to the Stromberg Carlson Electric Landing Gear Set part # LG-4 but without the motor you will need to obtain the following: Replacement Lead Leg for Stromberg Carlson Landing Gear - part # LG-177202 Replacement Follow Leg for Stromberg Carlson Landing Gear - part # LG-177201 Replacement Footpad and Pin for Stromberg Carlson Landing Gear - part # LG-119225 (2) Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear - part # LG-179015 Replacement...
    view full answer...
  • Replacement Landing Gear Legs for Set with Number VMC900R
    I spoke with my contact at Stromberg Carlson who confirmed that the Replacement Lead Leg # LG-177202 will work well as a replacement for your Venture VMC900. Then for the matching follower leg you would want the part # LG-177201.
    view full answer...
  • Recommended Dual-Motor Landing Gear To Replace Single Motor Landing Gear On Arctic Fox Fifth Wheel
    With the measurements you said you have on your system the landing gear I recommend for you is the Stromberg Carlson Venture Landing Gear. You will need two of the lead legs, part # LG-177202, two gearboxes, part # LG-179015, two motors, part # LG-196308, and two switches for the landing gears, part # LG-145236. We do not have a dual-motor landing gear kit that would be a replacement for your landing gear.
    view full answer...
  • How to Pick Out Landing Gear Replacement Legs
    The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it is 17-1/2 inches then the # LC333964 would fit and the replacement legs are part # LG-177202 for a lead leg and part # LG-177201 for a follower. If your frame clamps are instead 20-1/4 inches the Ultra Fab part # UF17-943010 would be a direct...
    view full answer...
    Image 1 for
  • Replacement Landing Gear Lead Leg for 45-0333
    I was able to cross-reference the part number you gave me and found that the correct landing gear lead leg you need is the part # LG-177202.
    view full answer...
  • Replacement Landing Gear Driver Leg for a 5th Wheel Trailer
    If the landing gear on your 5th wheel trailer is made by Lippert (LCI), Stromberg-Carlson, Venture, or Atwood then for a lead leg you could use # LG-179013 for a 6,000 pound system (the leg is rated at 3,000 pounds). The matching follower leg is # LG-179014. The replacement motor would be # LG-196308. We also have # LG-177202 which fits 8,000 pound systems that have dual motors or 5,000 pound systems with a single motor. The matching follower leg is # LG-177201. If you have a different...
    view full answer...
  • Replacement Landing Gear Legs for Venture 900 Landing Gear
    The correct replacement for your Venture VMC900R RV landing gear are part # LC119102 for the lead leg or # LC119101 for the follow leg. These will be direct replacements for the current legs you've got.
    view full answer...
    Image 1 for
  • Recommended Landing Gear Replacement Based on Weld Stop Location for Bracket Compatibility
    The bracket spacing between weld stops on your landing gear legs will be the determining factory for your replacement follow leg. There are two standard sizes for the weld stops; 33-1/2 inch legs have weld stop spacing of 19-1/2 and 21-1/2 inches whereas the shorter legs are 15-1/2 and 17-1/2 inches. If you need the longer weld stop spacing, I recommend the Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" # LG-177201. For matching lead leg, you may want # LG-177202. If...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Replacement Lead Leg for Bent Leg on Jayco 5th Wheel Trailer
    For your 2018 Jayco 5th wheel 29bhds, determining the weld stop locations will help you determine the correct replacement lead leg for your trailer. For instance the typical weld stops are 17-1/2 inches from outside to outside like you find in the Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" # LG-179013. However, there is another option that is also a standard fit in the 21-1/2 inch outside to outside measurement of the Replacement Lead Leg for Stromberg...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Determining The Correct Replacement Landing Gear For A 2010 Keystone Montana
    Absolutely, and thank you for your measurements. For your 2010 Keystone Outback 285FL, the closest we have is the Stromberg Carlson Electric Landing Gear Set # LG-4. The distance between the weld stops on # LG-4 is 19-1/2" which is 1/8" shorter than what you measured, I would double check that the measurement you measured is accurate to ensure these will work. Also, you will need to verify that the outside to outside measurement is 21-1/2". This landing gear has a total lift of 34-7/8",...
    view full answer...
    Image 1 for
  • Replacement Jack Legs For VMC900R Landing Gear
    While we do not have a way to look up your exact jack number we have found the Lead Leg # LG-177202 and Follow Leg # LG-177201 work as replacements for the VMC900R landing gear jack systems. You can verify this is the same jack leg as yours by measuring the overall length at 33-1/2" and the distance between the weld stops at 19-1/2". If you have a different measurement for either please let me know what your measurements are.
    view full answer...
  • Landing Gear Replacement for 2006 Keystone Challenger 29RK
    Your Keystone Challenger 29RK has mounting brackets that was designed for standard RV landing gear legs like the part # LG-2 so for a replacement lead leg you'd want the part # LG-177202 or the follow leg # LG-177201.
    view full answer...
  • Replacement Follower Leg Recommendation for 2011 Jayco Eagle Super Lite
    What you need is the Stromberg Replacement part # LG-177201 for the follow leg and part # LG-177202 for the lead leg. These match the weld brackets you have and are longer than the 179014 you have as well.
    view full answer...
  • Replacement Landing Gear Legs for a Venture Landing Gear Set
    For a replacement Venture landing gear lead leg you would want the part # LG-177202 and then for the follower leg you would want the part # LG-179014. If you also need the gear box you would want the part # LG-179015.
    view full answer...
  • Replacement Venture Lead and Follower Legs for Venture Landing Gear on 5th Wheel Trailers
    The replacement landing gear leg # LG-177202 is rated for 4,000 pounds for an 8,000 pound system using either manual crank or dual motors. For a single motor it is rated for 2,500 pounds. The matching replacement follower leg is # LG-177201. Lippert makes these legs now. They acquired Venture in 2004 or 2005 so since you have a 2009 toy hauler these are the correct replacements.
    view full answer...
  • My Follow Leg Has Different Gearing Than the Lead Leg
    I have an option to get the legs on your 1998 Nash 29.5 Fifth wheel to even out, but unfortunately gears are brand specific, so you won't be able to install replacement gears that will even out the gear ratio between two different brand legs. The most efficient option is to replace the lead leg with the matching Replacement Lead Leg for Stromberg Carlson Landing Gear # LG-177202. Replacing the leg will enable you to keep the legs moving at the same speed and will even out your trailer.
    view full answer...
  • Replacement Landing Gear For a 1999 Fleetwood Prowler 255 With Mounting Tabs Spread 19" Apart
    It sounds like you have the Stromberg Carlson Electric Landing Gear Set # LG-2 or one similar. This set uses legs 33-1/2" long with the distance between the mounting tabs being 19-1/2". We do offer the Lead # LG-177202 and Follow # LG-177201 legs separately if those are the only parts needing changed. The legs are compatible with other landing gear sets from Atwood, Venture, and Lippert using the same size legs.
    view full answer...
  • How To Choose the Correct Replacement Landing Gear Leg for a 5th Wheel Trailer
    There are basically two different types of landing gear legs. In order to make sure you get the correct one, we need to first measure your outer tube. The two most common outer tube measurements are 29-1/2" and 33-1/2". Once we have the outer tube measurement we can then measure the distance between the weld stops (inside to inside). This distance on the 29-1/2" long outer tube is 15-1/2" whereas it is 19-1/2" on the 33-1/2" long outer tube. I have attached the correct replacements based...
    view full answer...
    Image 1 for Image 2 for
  • Lead Leg Replacement or Repair for 2008 Crossroads Cruiser 29CK 5th Wheel Landing Gear
    It is very likely that you have the Venture landing gear with your Venture labeled motor. The gearbox is obviously working because the follow leg is working, so I recommend repairing the lead leg with # LG-146059 or replacing the lead leg with # LC119102. You can double check the fit by measuring the outer tube with press fitted cap which will be 29-1/2 inches. If you get a different measurement of 33-1/2 inches then you will use the replacement leg # LG-177202.
    view full answer...
    Image 1 for
  • Replacement Lead Leg and Gear Box for Venture Landing Gear
    The part numbers you have provided indicates that the landing gear is a Venture system. For a replacement 33-1/2 inch lead leg use # LG-177202. For the gear box use # LG-179015. Current pricing is available on the product pages.
    view full answer...


< Previous



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Shelly K
Updated by:
Shelly K
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Carrie F
Updated by:
Carrie F
Employee Wilson B
Written by:
Wilson B
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.